LANmark-OF Female Plug&Play MTP-LC Module

Products

LANmark-OF Plug&Play Ultra Low Loss Module Female Straight 24 LC OM4 Aqua

Nexans ref. N441.5L24LC4FS

  • Fiber optic type: MultiMode 50/125
  • Wiring type: Straight
  • Number of optical fibres: 24

 

LANmark-OF Plug&Play Ultra Low Loss Module Female Straight 12 LC OM4 Aqua

Nexans ref. N441.5L12LC4FS

  • Fiber optic type: MultiMode 50/125
  • Wiring type: Straight
  • Number of optical fibres: 12

 

LANmark-OF Plug&Play Low Loss Module Female Straight 12 LC SM Blue

Nexans ref. N441.5L12LC0FS

  • Fiber optic type: SingleMode 9/125
  • Wiring type: Straight
  • Number of optical fibres: 12

 

LANmark-OF Plug&Play Low Loss Module Female Straight 24 LC SM Blue

Nexans ref. N441.5L24LC0FS

  • Fiber optic type: SingleMode 9/125
  • Wiring type: Straight
  • Number of optical fibres: 24

 

LANmark-OF Plug&Play Ultra Low Loss Module Female Crossed 12 LC OM4 Aqua

Nexans ref. N441.5L12LC4FC

  • Fiber optic type: MultiMode 50/125
  • Wiring type: Crossed
  • Number of optical fibres: 12

 

LANmark-OF Plug&Play Ultra Low Loss Module Female Crossed 24 LC OM4 Aqua

Nexans ref. N441.5L24LC4FC

  • Fiber optic type: MultiMode 50/125
  • Wiring type: Crossed
  • Number of optical fibres: 24

 

LANmark-OF Plug&Play Low Loss Module Female Crossed 12 LC SM Blue

Nexans ref. N441.5L12LC0FC

  • Fiber optic type: SingleMode 9/125
  • Wiring type: Crossed
  • Number of optical fibres: 12

 

LANmark-OF Plug&Play Low Loss Module Female Crossed 24 LC SM Blue

Nexans ref. N441.5L24LC0FC

  • Fiber optic type: SingleMode 9/125
  • Wiring type: Crossed
  • Number of optical fibres: 24

 

Description

Description

Standards

  • International
    ISO/IEC 11801

The Plug&Play system consists of 3 subcomponents: the Plug&Play modules, the MTP-MTP* Pre-Terms and the Plug&Play patch panel.

 

The central component is the pre-installed Plug&Play module. The MTP connector at the back of the module connects at once 12 fibres to the MTP-MTP Pre-Term. Inside the module the fibres are spread out towards the LC adaptors at the front.

 

Up to 4 Plug&Play modules can be installed quickly into the Plug&Play patch panel with push rivets. With these 4 modules a medium density of 48 LC or a high density of 96 LC connections within 1U can be achieved.

 

The insertion loss for the Plug&Play module is measured according to standard IEC 61300-3-45. The minimum return loss for a MTP connection is measured according to IEC 61300-3-6.

 

The modules are available with a straight and a crossed wiring.

For polarity methods A,B and C of standard TIA-568-C following modules and trunks need to be used:

  • For a polarity method A implementation with a method A Pre-Term straight modules are used on both sides of the link.
  • For a polarity method B implementation with a method B Pre-Term a straight cassette is used on one side of the link and a crossed module on the other side of the link.
  • For a polarity method C implementation with a method C Pre-Term straight modules are used on both sides of the link.

 

The Plug&Play module has standard unpinned (female) connectors. This matches perfectly with the pinned (male) connectors of the MTP-MTP Pre-Term.

 

Since all connectivity is factory terminated and tested installation times are short facilitating a quick deployment.

 

* MTP is a trade name of US Conec

Characteristics

Characteristics

Construction characteristics

Construction characteristics

Connector type
LC

Resources

Resources

Contact us

Topics on which you wish to get more informations:

Required fields*

Please check your entry and try again.

An email address must contain a single @

Personal data protector

You have the right to object to the processing of your personal data and/or their use for direct marketing or commercial purposes

Thank you!

Thanks for contacting us. We will be in touch with you shortly.

Error

An error occurred. Please try again.

Close