FL-EXXE Inntak 1kV

Power distribution cable, designated for entry point installation or other general outdoor use (UV-resistant).

The cable is halogen free, TPI insulated and  PE sheathed. Each phase having insulation and an outer sheath.

The cable can be placed directly in soil.

The conductor is made of Low Carbon Aluminum, reducing the carbon footprint of the Cable compared to standard aluminum. 

Every part of the cable is reciclable due to the utilization of Thermoplastic insulation, TPI.

The outer sheath consist of at least 30% recycled PE.

When laying at a lower temperature than 0°C, care must be taken to avoid damage to the outer sheath. It is especially important that the cable is not exposed to impact at temperatures below 0 °C.

When laying at a lower temperature than -10 °C, the cable should be preheated before laying.

If the cable is cut and not installed immediately, each phase must be sealed, to prevent water intrusion.